1905 movie network news The movie Korea is scheduled for March 6, and the Korean poster is released at the same time. The film, directed by and starring, will be exclusively shown at Lotte Cinema in Korea. The film was released in mainland China on July 28th, 2023, with a total box office of 913 million yuan, becoming the domestic sports film box office champion in China film history.

Enthusiasm tells the story of Ding Lei (Bo Huang), a hip-hop coach, and Chen Shuo (YiBo), who loves hip-hop, overcoming various difficulties and leading the dance troupe "exclamation mark" to win the national competition. There are not only a lot of high-burning street dance scenes in the film, but also spiritual dialogues about youth, growth and dreams, which bring a journey of laughter and tears to the audience.

　　According to reports, on 26th, US President Trump said in an interview that the US and China have exchanged views on economic and trade issues in the past few days, and the two sides may reach an agreement during the G20 summit. If no agreement can be reached, he will impose additional tariffs on China. At today’s (27th) regular press conference of China’s Foreign Ministry, Geng Shuang, a spokesman, said that the US threat could not scare the people of China, and a trade war would harm others and harm themselves, which could not solve the problem at all.

　　Foreign Ministry Spokesperson Geng Shuang:China has always advocated resolving Sino-US economic and trade frictions through dialogue and consultation, but at the same time it will firmly defend its legitimate rights and interests. The US threatened to impose additional tariffs on China, which did not scare the people of China. Chinese believes in no evil and is not afraid of pressure. He never buys it. I would like to advise the US side once again that a trade war and tariff increase will not solve the problem at all. I hope that the US side will listen carefully to the opposition of different groups and the general public in the United States to trade wars and tariff increases in recent days, and also listen carefully to the resistance of the international community to unilateralism, protectionism and bullying during the G20 summit.

　　Geng Shuang expressed the hope that the US and China will move in the same direction, take care of each other’s reasonable concerns on the basis of mutual respect, equality and mutual benefit, and strive for mutual benefit and win-win. This is not only in the interests of China and the United States and the two peoples, but also the general expectation of the international community.

　 　 [XCAR domestic new car, original]

　 　 After a long period of warm-up in the early stage, recently, we finally learned that the new GLE will be officially launched on October 19. As the successor model to the previous ML class, the new Mercedes-Benz GLE will undergo a series of adjustments to the appearance, interior and configuration. It is equipped with 3.0T and 5.5T power, and is matched with a 9-speed automatic transmission.

　 　 Tips: The new car is a facelifted model of the current ML and will replace the ML; it was first launched in Asia at the 2015 Shanghai Auto Show; its four-door coupe version, the Mercedes-Benz GLE sports SUV, has been launched one step ahead on September 3

　 　 Although the new car has not yet been launched, I believe everyone should have heard of this model. Since the world premiere of the 2015 New York Auto Show in March this year, the launch of the GLE model means that the ML model will officially withdraw from the historical stage and completely replace its position. What changes have been made by the GLE with the new name compared to the ML model?

　 　 First of all, let’s take a look at the appearance. In the face of the exterior design of the new car, compared with the current ML, the GLE model gives people a more rounded overall feeling. The newly designed middle net and the more meticulous and delicate air power kit make the model more suitable for the family-style front face of Mercedes-Benz, and the overall appearance also reveals a slight crossover design style.

　 　 In the rear part of the car, the new car has adjusted the internal structure of the taillights, and the design of the rear bumper has also changed. It also uses a built-in two-sided polygonal exhaust pipe.

　 　 In terms of interior, referring to the new car released at the 2015 New York Auto Show, the GLE’s interior is roughly the same as that of the earlier Coupe models. In addition to the steering wheel differences, the electronic devices have also been improved. The human-machine interaction system with a larger screen and the new version of the dynamic control system (DYNAMIC SELECT) are also implanted. It is reported that this system can provide six different driving modes to choose from.

　　　　In terms of power, according to the previous declaration information in China, the new car will be equipped with 3.0T and 5.5T engines, and the transmission part will be fully matched with a 9-speed automatic transmission. At the same time, the new car will also be matched with a four-wheel drive system. The specific details are yet to be officially announced on the day of listing.

　 　 Editor’s comment:The upcoming launch of the new Mercedes-Benz GLE model will replace the original ML model to continue to complete the tasks it has undertaken in the family tree, and will try to further expand the client base with a new look. As for the follow-up efforts, we can only wait and see for the time being. It is expected that it will effectively hit competitors.

Review of relevant content:

Hello GLE Goodbye ML New York Auto Show Mercedes-Benz GLE Analysis

868,000, Mercedes-Benz GLE sports SUV Chengdu Auto Show

On December 28th, some bloggers exposed more spy photos of M8, a brand-new model in the world, mainly showing the tail shape of the new car. According to the picture, the tail of the M8 is designed with a penetrating taillight, and the light strip forms a linear effect after lighting. After careful observation, we can find the overall outline of the taillight module, which is similar to the taillight shape of Jiejie M9. It is expected that Jiejie M8 will adopt the same design of Xinghe headlight as M9.

Later this month, the spy photos of the front face of the M8 were also exposed. This model uses a dark red body color scheme, with a rounded front face and split headlights, which continues the family-style design style. Although the pictures of the side and back of the vehicle are not clear, it can be seen that the design of the door handle is relatively flat, and it is expected to adopt a semi-hidden design.

According to previous reports, HarmonyOS Zhixing plans to sell more than 10 models next year, including the M5, M7, M8 and M9. Enjoy the extended range power version of S9, and the models are divided into extended version and travel version; Wisdom S7, r7; Zunjie S800 and the second model of Zunjie. According to the report, as a brand-new model, the Wenjie M8 will be launched in the first half of 2025, and one of its benchmarking roles is the ideal L9.

The exposure of spy photos of the M8 in the world of inquiry not only attracted great attention from the industry and consumers, but also indicated the further expansion of the brand of inquiry in vehicle layout. With the launch of M8, the product line of the brand will be more abundant, providing consumers with more choices. At the same time, the listing of the M8 will also intensify the competition in the medium and large SUV market, especially the competition with the ideal L9 equivalent model.

A few days ago, overseas media once again exposed the latest rendered pictures of a new generation of BMW 3 Series models. The new car is scheduled to debut in 2026 and will be put on sale in 2027. At the same time, a new generation of domestic 3-Series models is expected to be launched one after another in the same year, and the size will be upgraded and optimized, which is more advantageous than the current G chassis series models. The main competitors at the same level include mercedes benz c-Class, Cadillac CT5 and the upcoming A5L models.

According to the introduction of overseas media, BMW’s new generation of 3-series models will adopt many design elements of the current 5-series models, and the head is equipped with a brand-new LED headlight group. The two sides of the car body adopt the same design of 5-series models and provide hidden door handles. The rear part of the car is also equipped with a 5-series LED taillight group, and the hidden exhaust layout is selected below.

In terms of power, BMW’s new generation 3 Series fuel version will continue to be built on the CLAR platform, and 2.0T and 3.0T turbocharged models will be launched simultaneously for consumers to choose, and all of them will be adapted to the 48-volt light mixing system. The original M340i model will also be renamed M350i, the transmission system will be matched with the 8-speed automatic manual transmission, and some models will also be adapted to the four-wheel drive system. The new BMW i3 model will be built based on the new Neue Klasse architecture platform, and the single-motor and dual-motor four-wheel drive models will be launched simultaneously for consumers to choose, and the M3 pure electric model is also expected to be the first to be launched in 2025.

　　On August 9th, as a sub-activity of the 6th Global cross-border electronic commerce Conference, the first global cross-border e-commerce youth innovation and development summit forum was held in Zhengzhou E Trade Expo Center.

　　More than 300 people from international organizations, heads of well-known logistics enterprises at home and abroad, young talent leaders of cross-border e-commerce, senior youth entrepreneurship and employment guidance experts, and university scholars gathered together to discuss new ideas and ideas for the development of cross-border e-commerce industry in the new era around the theme of "New Economy, Creating Youth and Winning the Future", and share innovative ideas and scientific research achievements such as cross-border e-commerce brands going to sea, trade transformation, and young talent entrepreneurship and employment.

　　Today’s Henan needs a group of outstanding young talents with creativity and high skills more than ever before. "Young people are the main force in the cross-border e-commerce industry. This forum is to build a platform for cooperation and exchange for them, and further lead the young people in the cross-border e-commerce industry to actively participate in the strategy of innovation-driven, rejuvenating the province through science and education, and strengthening the province with talents, and contribute their youth to accelerating the construction of national innovative highlands and institutional open highlands." Hairun Hua, member of Henan Provincial Committee of the Communist Youth League and secretary of Zhengzhou Cross-border E-commerce Industry Working Committee, the initiator of this forum, said.

　　"We must encourage young people in the new era to show their youthful vitality and voice their voices in the practice of joining the cross-border e-commerce industry, and actively provide a good communication platform for young talents to learn cross-border e-commerce knowledge under the new situation and improve their professional skills in the industry." Li Jianwei, executive vice president of the Provincial College Graduates Employment Promotion Association, said.

　　In recent years, cross-border e-commerce in Henan has grown against the trend under the situation of epidemic prevention and control, and provided assistance for global epidemic prevention. The construction of the "Online Silk Road" has been deepening. Lu Shuifu, deputy secretary of the Party Committee of Henan Bonded Group, said that he hopes that this forum can widely mobilize and lead young people to become pioneers of scientific and technological innovation, so that the "youth" power can be deeply integrated with the "youth" industry, and innovation can become an inexhaustible motive force for blooming youth; The group will continue to explore new ways and means to serve young people in the cross-border e-commerce industry, and strive to formulate standards for training young talents in this industry.

　　"In today’s big data environment, many young talents have flooded into the e-commerce industry. The phenomenon of live broadcast in online celebrity has become a social craze, which is a brand-new shopping experience for overseas consumers." Yuan Chunlin, a doctoral tutor at Henan University, said. In his speech, he shared the research results on the formation process, effect and management logic of quasi-social experience in the live broadcast situation in online celebrity.

　　On the same day, Xingyao Yifeng Group signed strategic cooperation contracts with Kaifeng Education and Sports Bureau, Luohe Vocational and Technical College, Kaifeng University and Zhengzhou Vivian Dawson International Textile City on school-enterprise cooperation, youth talent training, and the joint construction of cross-border e-commerce incubation base and e-commerce industrial park. (Reporter Song Min)

[car home Electric Vehicle Technology] Recently, BYD iTAC (Intelligent Torque Adaptation Control) was officially released. Car home has the opportunity to test-drive a test car equipped with this technology first. What is the use of this innovative intelligent torque control system? What is the working principle behind it? Let’s take a look at it together.

● What functions does ITAC realize?

ITAC is based on the extremely fast response speed of motors, which can adjust the output torque of each motor in real time, minimize the dynamic change of vehicles, and greatly improve the safety, comfort and handling of vehicles.

For example, when starting on a slope with low adhesion, iTAC system can accurately control the output torque to avoid wheel slip caused by excessive torque; At the same time, on the ramp (for example, when the front of the vehicle points to the top of the slope), the load on the rear axle is greater, and the rear wheel has greater grip, so the system will distribute more torque on the rear wheel, thus improving the starting and driving efficiency of the vehicle on the ramp.

When the driver suddenly steps on the accelerator to accelerate, the center of gravity shifts backward, the load on the front axle decreases, and the load on the rear axle increases. The system will distribute more torque on the rear wheel, which will improve the speed-up performance and driving efficiency of the vehicle.

For example, when the vehicle has the trend of understeer, the system will appropriately reduce the torque output of the front axle and increase the torque output of the rear axle, so that the cornering characteristics of the vehicle tend to neutral steering and improve the maneuverability and safety of the vehicle; When the vehicle tends to oversteer, the system will appropriately increase the torque output of the front axle and reduce the torque output of the rear axle, so that the cornering characteristics of the vehicle tend to neutral steering. The following official video briefly introduces iTAC technology and recommends you to watch it.

More exciting videos are all on the car home video platform.
"BYD iTAC Technology Introduction Video"

● Where is the innovation of ITAC technology?

The innovation of iTAC technology is not in the logic of torque distribution control, because some of the working logic mentioned above has been very common in mainstream four-wheel drive systems. Whether it is a pure electric four-wheel drive vehicle or a fuel four-wheel drive vehicle, the torque distribution of the front and rear axles also follows the above basic logic.

This involves the resolver sensor which can improve the output frequency and accuracy of motor speed signal and the motor with faster torque response than the traditional fuel engine.

The larger minimum scale of the rotation angle means that the angular resolution of the traditional wheel speed sensor is low. At the same time, the wheel speed can be calculated by using the time difference between two adjacent pulse signals of the wheel speed sensor. Therefore, the higher the wheel speed, the higher the frequency of wheel speed information output by the electronic control unit.

When the vehicle starts, when the wheel speed is very low, the frequency of the wheel speed signal is also low, which makes the electronic control unit judge the wheel slip rate at a low frequency, and can’t keenly identify the wheel slip trend. As a result, when the wheel slips, the response of ESP to intervene in controlling the wheel slip is slow, and it is often necessary for the wheel to intervene to brake the slipping wheel when it is obviously slipping and idling, resulting in unnecessary energy loss.

At the same time, according to the signal of the resolver sensor, the electronic control unit can calculate the wheel speed at a frequency exceeding 200Hz, and can keenly identify the wheel slip trend, and predict the wheel speed change more than 50ms earlier than before.

Compared with the traditional ESP hydraulic control method to brake the slipping wheels, the speed of reducing the motor output torque by using the electronic control system is much faster, and the control speed is more than 10 times faster. Therefore, the model equipped with iTAC system can effectively avoid wheel idling and slipping, reduce energy loss and improve the driving efficiency of the vehicle.

● Relationship between ITAC and dTCS

DTCS(distributed TCS) previously announced by BYD is simply a part of ESP electronic body stability program. The innovation of dTCS is to simplify the electronic and electrical architecture, achieve lower traction control delay and optimize the system performance.

ESP mainly improves the driving stability of vehicles by reducing the torque and braking. iTAC can not only reduce the torque, but also dynamically adjust the torque distribution of front and rear axles, which contributes to the driving stability, handling, safety and energy saving level of vehicles.

　　

　　　 On the morning of January 31, 2008, the retired Navy 105 was towed into naval museum, Qingdao by tugboat and officially opened to tourists.

　

　　　　On the morning of January 31, 2008, the retired Navy 105 was towed into naval museum, Qingdao by tugboat and officially opened to tourists.

　　　　On the morning of January 31, 2008, the retired Navy 105 was towed into naval museum, Qingdao by tugboat and officially opened to tourists.

　　

　　　 On the morning of January 31, 2008, the retired Navy 105 was towed into naval museum, Qingdao by tugboat and officially opened to tourists, bringing the number of warships in naval museum, Qingdao to five. 105 "Jinan Ship" is the first naval ship developed by China itself and a star ship in China.

　　　

Editor: Fan Jing

　　[Aika Auto Overseas New Car Original]

　　According to foreign media reports, after many "jumping tickets", the Mercedes -AMG ONE supercar, which originated from Formula One, will be put into production next year. Mercedes -AMG will also provide the delivery schedule of ONE hypercar to customers around the world later this week.

　　Mercedes -AMG ONE is actually from the AMG Project ONE concept car, which was first unveiled at the Frankfurt Motor Show in 2017 to celebrate the 50th anniversary of AMG. However, for various reasons, this model has not been mass-produced.

　　As the power system of the car is equipped with a hybrid system consisting of a 1.6T V6 engine and four motors of the same model as Mercedes -AMG F1 racing car, its maximum power can reach 735kW(1000 HP). The car can accelerate from standstill to 200km/h in 6s, and the maximum speed can reach 350 km/h.

　　This car is also called "Civil F1" by fans. The price of the new car is nearly $3 million, and the global limited sales are 275 units. Although the price is expensive, the F1 car can be legally put on the road, and this super sports car will naturally be sold out soon, not to mention that this limited edition model can add value in the future.

　　Mercedes -AMG ONE originally planned to deliver to customers in 2019. However, due to the idle stability of the engine below 5,000 rpm, and the difficulty in meeting various emission regulations for the new car, the delivery of the vehicle was delayed.

　　In order to endorse this unique Mercedes -AMG ONE, Mercedes also invited F1 driver lewis hamilton to shoot a series of short films to endorse it. He is also the first black driver in F1 history and the strongest active driver with seven F1 world champions. Think about it. Being able to drive a super sports car with the same power as the F1 world champion is tantamount to becoming an F1 racer. I’m afraid you may not be able to experience this feeling if you have money.

　　It is not the first time that Mercedes has turned racing cars into mass-produced civilian cars. As early as 1994, FIA introduced a brand-new group GT1/Le Mans. There are almost no restrictions in this group. The only restriction is that the participating automakers need to produce at least one legal road version of this model.

　　Mercedes-Benz and AMG worked together to design vehicles, and in 1997, the classic Mercedes-Benz AMG CLK GTR was launched. It was equipped with a 6.9L displacement V12 engine with a maximum power of 444kW(604 HP), an acceleration time of 0-96km/h of only 3.8s and a top speed of 320 km/h. This kind of power existed like a ceiling at that time.

　　This classic Mercedes-Benz AMG CLK GTR also rubbed the Porsche 911 GT1 on the ground and won several world titles. So in 1998 and 1999, AMG built 25 limited-edition road versions of GTR, and the initial price was as high as $1,547,620. In an auction in 2016, one of them sold for $2.6 million, and the current valuation of this car is between $8.5 million and $10 million.

　　Editor’s comment:As the first Mercedes -AMG ONE to transplant F1 racing power to civilian vehicles, this model also continues many classic design elements of Mercedes-Benz AMG CLK GTR. Its birth will once again become a frequent visitor in the auction market. Although the price is as high as 5 million US dollars, who will refuse such a wealth management product?

Wonderful content review:

Power-on-shoulder super-running? Spy photos of AMG SL plug-in version

AMG S 63e road test spy photos expose new cars or scheduled production.

Mercedes-Benz CLE Coupe imaginary map exposure or debut next year.

　　Cctv newsAccording to China Weather Network, there is still heavy rainfall in Sichuan, Chongqing and Guizhou today (June 2). Tomorrow and the day after tomorrow, areas with strong rainfall will develop eastward, and heavy rain will also occur in parts of Henan and Anhui. In terms of temperature, there will still be hot weather in South China, southern Sichuan and northern Yunnan in the next three days. Please pay attention to heatstroke prevention.

　　Heavy rains have occurred in some areas in Guizhou and Sichuan, and rains have resumed in Henan.

　　Yesterday, China’s heavy rainfall mainly occurred in parts of Northeast China, Northwest China and Southwest China. Monitoring shows that from 8: 00 yesterday to 6: 00 today, scattered heavy rain or heavy rain occurred in parts of central Guizhou, western Hunan, southeastern Fujian and southwestern Guangdong, and local heavy rains such as Bijie in Guizhou and Yunfu in Guangdong; Heavy rains occurred in southeastern Jilin and eastern Liaoning, local rainstorms in Tonghua, Liaoning, Fushun and Benxi, and local rainstorms in Liaoyang, Liaoning.

　　Today, the rainfall in the northeast has weakened, and there are still strong rainfall in Sichuan, Chongqing and Guizhou, and there are heavy rains in some areas. Tomorrow and the day after tomorrow, areas with strong rainfall will develop eastward, and heavy rain will also occur in parts of Henan and Anhui.

　　Specifically, the Central Meteorological Observatory predicts that today, there will be moderate to heavy rain in southeastern Gansu, southwestern Shaanxi, eastern Sichuan, most of Chongqing, north-central Guizhou, northwestern Hunan, western Hubei, and southeastern Guangdong. Among them, there are heavy rains in parts of northeastern Sichuan, northeastern and southern Chongqing, northern and eastern Guizhou, and heavy rains in northern Guizhou.

　　Tomorrow, there will be moderate to heavy rain in parts of northern and eastern Qinghai, southwestern Shaanxi, northeastern Sichuan, most of Chongqing, central and northern Guizhou, western and northern Hubei, southern Henan, central Anhui, southeastern Jiangxi, western Fujian and Taiwan Province Island, among which there will be heavy rain or heavy rain in parts of northeastern Sichuan, northern Chongqing and northern Guizhou.

　　The day after tomorrow, there were moderate to heavy rains in parts of southeastern Shaanxi, most of Chongqing, most of Guizhou, western and northern Hubei, southern Henan, central Anhui, southern Jiangsu and central and southern Jiangxi, among which there were heavy rains in parts of southern Chongqing, western and northern Guizhou and northwestern Hubei.

　　The meteorological department reminded that Sichuan, Chongqing, Shaanxi and other places have had frequent rainfall in recent days, so it is necessary to pay attention to prevent secondary disasters such as flash floods and landslides that may be caused by continuous heavy rainfall. There will be strong rainfall in the wheat harvest area in southern Henan province tomorrow and the day after tomorrow. Farmers need to speed up the harvest and guard against the adverse effects of rainy weather.

　　The high temperature in South China continued until the weekend, and the rain in the eastern part of Northwest China added coolness.

　　In terms of temperature, yesterday, the high temperature range in South China and other places was still large, but the intensity was weakened, and the area above 37℃ contracted obviously, mostly in western Guangxi, northern and southeastern Yunnan, southern Sichuan and other places.

　　In the next three days, there will still be hot weather in South China, southern Sichuan and northern Yunnan. After 4 days, the high temperature in Yunnan to South China will be reduced, but the highest temperature in Guangdong, Guangxi, Fujian and other places is still around 33℃, and in some areas it can reach above 35℃, and the lowest temperature is above 25℃. In addition, the humidity is high and the sultry feeling continues. The public should pay attention to heatstroke prevention.

　　The temperature in most parts of the north in the next three days is generally lower than that in the same period of normal years, especially in the eastern part of the northwest where it rains frequently. For example, the highest temperature in Xi ‘an in the next three days is less than 20℃, and Lanzhou is only about 20℃. The public should pay attention to adjusting their clothes in time to avoid catching a cold.